Dropped Calls, broken-in video conferences and mobile Internet, the loads at a snail’s pace – poor mobile reception in the office is not a fate, but a solvable technical Problem, how Jawnet IT Services know from numerous projects.
Poor mobile reception in office buildings is more common than you think – and annoying than many admit. In this case, the Problem is rarely with the network operator, but in the fabric of the building itself. Concrete, metal, and modern thermal Insulating glass block mobile phone signals, to great effect, often without the tenant or owner notice that when you move in. Alexander Jawinski, owner of the Jawnet IT Services LTDand his Team have in a variety of projects shown, how this is a Problem with a professional Amplifier technology, reliable and durable as well.
Mobile phone reception in the office is often only become an issue when it is really bad – if talks break off, data connections to collapse or employees will have to run to the window to get a Signal. The Jawnet IT Services LTD provides for exactly this Problem, a structured solution: from initial site analysis and selection of appropriate signal amplifier to the professional Installation and commissioning. All common mobile communications standards, and the network will be covered by the operator without any additional monthly costs or long-term commitments. The result is a stable, reliable cellular signal in all areas of the building.
Why mobile is in the building, there is a growing Problem
At first glance, it sounds like a paradox: The mobile networks are becoming more and more powerful, the network coverage is always better – and yet, more and more companies are complaining about poor reception in your office space. The reason for this is not in the networks themselves, but in an opposite Trend: the Modern buildings are insulated better, more energy-efficient glazed and poet built and the cost of the mobile radio signals.
External thermal insulation composite systems, metal-coated window glass with low-emissivity and massive concrete structures to dampen high-frequency radio signals significantly. What is the energy balance of a building, for the mobile reception is poor. Add to this that 5G signals will be transmitted on higher frequencies than older Standards and higher frequencies are shielded from building materials are stronger than lower. This means that the more modern the network, the greater is potentially the reception problem inside the building. Jawnet IT Services observed this development for years and has developed appropriate solutions.
Why not help a change of providers is poor and the in-house reception-most of it?
Many companies are responding to bad cell phone reception with an exchange of the network operator and are surprised if the Problem remains. The reason is simple: the Problem is with The power out, but the signal loss through the building envelope. All network operators are affected equally. The Jawnet IT Services LTD. therefore relies on solutions that work, regardless of the provider, and all major mobile strengthen frequencies at the same time.
Amplifier technology: How the Jawnet IT Services LTD is a modern signal amplifier uses
The basic idea behind cellular amplifiers Signal technically elegant: An outside antenna receives the existing cellular signal from the nearest cell tower, it forwards it via a cable to an amplifier, which is processed and amplified, and distributed indoor antennas throughout the building. The result is a strong, stable Signal in all the rooms – regardless of how well the outer cover of the building.
Alexander Jawinski, owner of the Jawnet IT Services LTD., at the selection and Installation of these systems is of special value to certified devices for the European market are allowed. In Germany, Austria and Switzerland specific regulatory requirements on the operation of the signal apply amplifiers – non-approved devices can interfere with the operation of the network, and is illegal. The Jawnet IT Services LTD works exclusively with systems of renowned manufacturers such as Zyxel ZoneDAS, Nextivity Quatra and JMA Wireless, bringing in all relevant approvals.
Which systems are suitable for which building size?
The selection of the right system depends on several factors: the size of the buildings, number of floors, fabric and the desired coverage. For smaller offices with an area of up to a few hundred square meters compact single-sufficient systems. Larger buildings, or those with complex layouts in need of distributed antenna systems, in which multiple indoor antennas fed through a Central System. Jawnet IT Services prior to any Installation, a site analysis and recommends on the Basis of this analysis, the matching System without unnecessary over-sizing.
Site Survey: Why a professional site analysis is the first step
Before any cable or an antenna mounted in the Jawnet IT Services LTD is the professional site analysis at the beginning. This is called a Site Survey is far more than a brief tour of the building – you have to strengthen a systematic Measurement of the actual signal in all areas, combined with an analysis of the structural conditions and the existing network infrastructure.
The result of the Site Survey forms the basis for all subsequent decisions: Where is positioned the external antenna? How many indoor antennas are needed, and where will they be placed? What are the cable runs are possible, and how the signals are distributed to the different floors? Without this analysis, each Installation is a shot in the dark – with her plan in a hope of profit. The Jawnet IT Services LTD supplies after the Site Survey, a detailed report with specific recommendations and a realistic assessment of the achievable improvement.
The following information will be collected in the context of the Site Survey and evaluated:
- Measurement of the current signal strengths of all relevant mobile frequencies in all areas of the building
- Analysis of the structure and identification of the strongest damping sources
- Assessment of possible positions for external antennas and line-of-sight to the next transmission tower
- Planning the cable management and antenna positions, taking into account the existing infrastructure
- Documentation of measurement results and recommendations in a structured final report
Installation, commissioning and maintenance – all from a single source
Professional Installation goes far beyond the attachment of antennas. Cable management, system configuration, tuning of the gain and final Review of all frequency bands are tasks that require experience and expertise. Jawnet IT Services is responsible for the entire Installation and ensures that the System after commissioning, exactly what it should – in all areas of the building, and for all users.
Alexander Jawinski, with a particular emphasis on a thorough acceptance after Installation: All relevant frequency bands are measured, the improvement compared to the initial condition and documented, and any adjustments to be made before the System is officially opened. After the Installation is Jawnet IT Services LTD is as a point of contact for maintenance, enhancements or adaptations of, if the use of the building changed.
The following services are included in the standard scope of a signal repeater Installation:
- Professional installation of all antennas and system components according to the requirements of the manufacturer
- Installation and Assembly of the connection cable according to the Standards of craftsmanship
- System configuration and fine-tuning of the gain for each frequency band
- Completion of the measurement and documentation of the achieved signal of quality in all areas of the Building
- Delivery of a complete system documentation, including device data and configuration parameters
Poor mobile reception in the office, not a law of nature is, he is a technical Problem with a technical solution. Those who approach this Problem in a professional, winning not only better coverage and more stable data connections. He also creates the prerequisite for this is that modern ways of working, mobile Working, video telephony, cloud-based applications throughout the building to function reliably. Jawnet IT Services is an experienced Partner to guide the entire process from initial analysis to final acceptance.
